Microcement Tiled Surface Kit – Cemento 3D – 15 m²

Microcement Kits

Microcement Tiled Surface Kit – Cemento 3D – 15 m²

A reinforced 15 m² Cemento 3D system for correctly prepared existing tiled surfaces.Tiled floors and tiled walls require Primer Beton and fibreglass mesh before Cemento 3D application.Included 1 × 20 kg Nikkolor Primer Beton 1 × fibreglass mesh allocation for up to 15 m² 1 × 20 kg Nikkolor Cemento 3D in the selected colour 1 × 2.5 L Nikkolor Decor Finish in Matt or Semi-Gloss Kit value Primer Beton — $255 Fibreglass mesh — $79 Cemento 3D — $280 Decor Finish — $239 Total: $853 AUDCoverageDesigned for up to 15 m² over two Cemento 3D coats.

Product gallery · Select an image to view

Nikkolor — diamo forma al futuro

System selector

Choose the right kit

1. Product
2. Application

From $853.00

Select a finish below for the exact price

Choose Your Finish

Select a Tint — 16 colours

In stock — ships within 2–3 business days

Project-specific support

Product selection and application depend on the substrate, exposure and site details. Ask product support →

Selected system components

  • 1 × 20 kg Nikkolor Primer Beton
  • 1 × fibreglass mesh allocation for up to 15 m²
  • 1 × 20 kg Nikkolor Cemento 3D in the selected colour
  • 1 × 2.5 L Nikkolor Decor Finish in Matt or Semi-Gloss

Need help choosing?

0407 724 161 hello@lux-cement.com

System information

System contents

Included

  • 1 × 20 kg Nikkolor Primer Beton
  • 1 × fibreglass mesh allocation for up to 15 m²
  • 1 × 20 kg Nikkolor Cemento 3D in the selected colour
  • 1 × 2.5 L Nikkolor Decor Finish in Matt or Semi-Gloss

Coverage

Coverage

Designed for up to 15 m² over two Cemento 3D coats. Actual coverage varies with tile condition, joints, substrate preparation, texture, thickness and wastage.

This system does not replace compliant waterproofing, movement joints or substrate repairs. Existing tile adhesion and substrate stability must be assessed before application.

Suitable applications

A reinforced 15 m² Cemento 3D system for correctly prepared existing tiled surfaces.

Tiled floors and tiled walls require Primer Beton and fibreglass mesh before Cemento 3D application.

Kit value

  • Primer Beton — $255
  • Fibreglass mesh — $79
  • Cemento 3D — $280
  • Decor Finish — $239

Total: $853 AUD

Substrate requirements

Confirm substrate stability, preparation, moisture conditions, waterproofing and movement detailing before specifying the system.

Important limitations

Suitability depends on the substrate, intended use, exposure and project detailing. Confirm the complete system before ordering.

Complete system calculator

Calculate every material you need.

Select a system and enter the measured area. Primer, reinforcement, finish materials, additives and sealer are calculated automatically with 10% allowance and optimised pack quantities.

Project-specific selection

Primer, reinforcement, decorative materials and protection are confirmed after the substrate and intended use have been assessed. Contact Lux Cement before ordering a complete system.