Microcement Benchtop & Joinery Kit – MicroCem-FB – 15 m²

Microcement Kits

Microcement Benchtop & Joinery Kit – MicroCem-FB – 15 m²

A reinforced MicroCem-FB system for correctly prepared benchtops, joinery, furniture and integrated architectural surfaces.Benchtops require Primer NK, fibreglass mesh and VetroLiquido PRP protection.

Product gallery · Select an image to view

Nikkolor — diamo forma al futuro

System selector

Choose the right kit

1. Product
2. Application

From $833.44

Select a finish below for the exact price

Choose Your Finish

Select a Tint — 16 colours

In stock — ships within 2–3 business days

Project-specific support

Product selection and application depend on the substrate, exposure and site details. Ask product support →

Selected system components

  • 1 × 2.5 L Nikkolor Primer NK
  • 18 m² pre-cut fibreglass mesh, including overlap and trimming allowance
  • 1 × 20 kg Nikkolor MicroCem-FB
  • 2 × 250 ml Nikkolor toner in the selected colour
  • 1 × 2.5 L Nikkolor VetroLiquido PRP in Matt or Satin

Need help choosing?

0407 724 161 hello@lux-cement.com

System information

System contents

Included

  • 1 × 2.5 L Nikkolor Primer NK
  • 18 m² pre-cut fibreglass mesh, including overlap and trimming allowance
  • 1 × 20 kg Nikkolor MicroCem-FB
  • 2 × 250 ml Nikkolor toner in the selected colour
  • 1 × 2.5 L Nikkolor VetroLiquido PRP in Matt or Satin

Coverage

Coverage

Allocated for up to 15 m² over two MicroCem-FB coats. Edges, upstands, penetrations, texture and wastage affect actual coverage.

Substrate stability, joints, sink and tap penetrations, heat exposure, moisture exposure and intended use must be assessed before application. Use chopping boards and suitable protective mats in service.

Suitable applications

A reinforced MicroCem-FB system for correctly prepared benchtops, joinery, furniture and integrated architectural surfaces.

Benchtops require Primer NK, fibreglass mesh and VetroLiquido PRP protection. Choose from 16 Nikkolor colours and Matt or Satin PRP.

Substrate requirements

Confirm substrate stability, preparation, moisture conditions, waterproofing and movement detailing before specifying the system.

Important limitations

Suitability depends on the substrate, intended use, exposure and project detailing. Confirm the complete system before ordering.

Complete system calculator

Calculate every material you need.

Select a system and enter the measured area. Primer, reinforcement, finish materials, additives and sealer are calculated automatically with 10% allowance and optimised pack quantities.

Project-specific selection

Primer, reinforcement, decorative materials and protection are confirmed after the substrate and intended use have been assessed. Contact Lux Cement before ordering a complete system.