Microcement Bathroom Kit – MicroCem-FB – 15 m²Complete TA system $58.92 / m²

A complete MicroCem-FB microcement bathroom system with total nominal coverage of up to 15 m².

The 15 m² figure describes the kit’s total nominal coverage. It does not mean 15 m² of bathroom flooring. The coverage may be allocated across selected bathroom walls, floors, or a combination of both, subject to the correct system being specified for each substrate.

Final suitability and component requirements depend on the substrate, surface condition, compliant waterproofing system, primer, reinforcement, application thickness, texture and wastage. Concrete, screed, plasterboard, Villaboard and existing tiled surfaces can require different preparation. Floors and tiled surfaces require the appropriate reinforcement system.

Included

• 1 × 2.5 L Nikkolor Primer NK
• 18 m² pre-cut fibreglass mesh, including overlap and trimming allowance
• 1 × 20 kg Nikkolor MicroCem-FB
• Nikkolor toner in the selected colour and tone. Refer to the three tone options per 20 kg below.
• 1 × 2.5 L Nikkolor Decor Finish in Matt or Semi-Gloss

Three tone options per 20 kg

The same three tone options apply to all 16 Nikkolor colours, including Tapioca.

• TC Dark — 4 × 250 ml bottles per 20 kg
• TB Medium — 3 × 250 ml bottles per 20 kg
• TA Light — 2 × 250 ml bottles per 20 kg

This dosage guide applies to 20 kg Cemento 3D and MicroCem-FB packs. Toner is sold and priced per individual 250 ml bottle.

Coverage

Provides up to 15 m² total nominal coverage over the specified MicroCem-FB build-up. Actual coverage varies with substrate condition, thickness, texture, application technique and wastage.

This system does not replace compliant bathroom waterproofing, falls, drainage, movement joints or substrate repairs. Waterproofing, residual moisture and substrate suitability must be confirmed before application. Do not apply the next system stage unless the substrate and preceding coat meet the relevant cure and moisture requirements.