Is microcement waterproof on its own?

No decorative finish replaces NCC-compliant waterproofing membranes, falls, drainage, movement detailing or substrate preparation. A finished outcome depends on the whole project build-up and the conditions it is applied into.

What should I order with the finish material?

The materials and application sequence depend on the substrate, its condition, the intended use, exposure and project detailing. Ask Lux Cement to review those conditions before ordering; no single build-up applies universally.

How is product suitability assessed?

Suitability is project-dependent. The substrate, detailing, preparation, intended use, exposure, application and care all matter, so seek project-specific advice rather than relying on a general product statement.

Why order a physical sample?

Mineral finishes hold light, trowel pressure and tonal variation in ways a screen cannot reproduce. View a physical sample beside your joinery, stone and paint before committing to a full system.

Australia-wide material supply

Buy microcement in Australia.
Start with the substrate.

Shop current Nikkolor microcement finishes and physical samples, supplied from Torquay across Australia. Select the finish only after considering the substrate, intended use, exposure and project detailing.

For homeowners & designers

For experienced applicators

Made in Sicily · supplied nationally

Shop

Order samples

The current collection · 02

Microcement Collection.
Select a product to view and order.

Microcement

Microcement – Nikkolor Cemento 3D Structured Finish – 20 kg

Structured Italian microcement designed for seamless architectural finishes with subtle movement or deeper sculpted texture. For correctly prepared floors and walls Hand-trowelled continuous finish Supports restrained or expressive surface design Used with compatible primer, colour toner and protection Three tone options per 20 kg The same three tone options apply to all 16 Nikkolor colours, including Tapioca. TC Dark — 4 × 250 ml bottles per 20 kg TB Medium — 3 × 250 ml bottles per 20 kg TA Light — 2 × 250 ml bottles per 20 kg This dosage guide applies to 20 kg Cemento 3D and MicroCem-FB packs. Toner is sold and priced per individual 250 ml bottle.

From $308.00

Microcement

Microcement – Nikkolor MicroCem-FB Fibre-Reinforced – 20 kg

Professional Italian fibre-reinforced microcement for continuous, material surfaces across correctly prepared floors and walls. Fibre-reinforced structure Reduced-thickness architectural finish Suitable for residential, commercial and hospitality applications when used within the specified system Hand-applied colour and texture Primer, toner and protective finish are selected separately according to the substrate and intended use. Three tone options per 20 kg The same three tone options apply to all 16 Nikkolor colours, including Tapioca. TC Dark — 4 × 250 ml bottles per 20 kg TB Medium — 3 × 250 ml bottles per 20 kg TA Light — 2 × 250 ml bottles per 20 kg This dosage guide applies to 20 kg Cemento 3D and MicroCem-FB packs. Toner is sold and priced per individual 250 ml bottle.

From $350.90

Primer, finish and sealer selection is substrate- and exposure-dependent. Request project support before ordering or finalising a specification.

How to buy well · 03

Begin with what the surface must do.

Read the room

Walls, floors, wet-area surrounds and exterior conditions ask different questions of the build-up.

See it physically

Order samples and assess the real mineral surface with your palette, light and joinery.

Specify the sequence

Choose the active finish, correct primer and compatible sealer as a complete system.

Detail the project

Membranes, falls, drainage, joints and transitions belong in the construction detail, not the finish claim.

Bathroom applications Floor applications Feature walls

Project context · 04

Begin with the substrate. Then consider the whole project.

Material selection does not replace project-specific design, compliant waterproofing, drainage, movement detailing or skilled application. Site conditions and intended use must be assessed before a recommendation is finalised.

Need a material conversation? Our support starts with your substrate and project conditions, not a generic finish promise.

Project support

Choose your route · 05

The right next move is a form of care.

I am specifying a project

Start with samples, then speak with Lux Cement about material, visual direction and the appropriate support journey.

Project support

I am an experienced applicator

Open a trade account for live product access, Australia-wide supply and support from working applicators.

Trade supply

I want to learn the system

Build practical capability before you buy for a full job. Lux Academy offers hands-on training in material technique and project assessment.

Academy training

Buyer questions · 06

Before a surface becomes a site.

Clear answers, with the limits left intact. For a project-specific response, contact the Torquay team.

Contact & showroom support

Yes. If this is your first microcement project, we strongly recommend completing the Lux Cement Academy course before you begin. You will gain practical training and project support to help you prepare, specify and apply the system correctly. Incorrect preparation or application can cause the finish to fail and may affect your eligibility for a product warranty.

The first decision is tangible

Put the finish
in your hand.

Start with physical samples. Then bring the surface, the substrate and the ambition into the same conversation.

Order samples Buy microcement

Buy microcement in Australia.Start with the substrate.

Microcement Collection.Select a product to view and order.